Danuser EP20 Manual de usuario descargar pdf (Pagina 15)

Troubleshooting

a) Low flow Check with flow meter.

If low, investigate the cause.

b) Fittings or connections Replace with proper fittings.

are too small or incompatible

c) Line restrictions Clear lines.

d) Dirty oil or oil filter Change oil and oil filter according

to vehicle manufacturer’s

recommendation.

e) Hydraulic pump worn See your dealer for repairs.

or damaged

a) Worn teeth or point Replace with new ones.

b) Ground too hard and dry Order hardfaced or carbide teeth

and point.

a) Low system pressure (PSI) Check with pressure gauge.

If low, investigate the cause.

a) Fittings loose or damaged Tighten or replace fittings.

b) Hoses loose or damaged Tighten or replace hoses.

c) Hydraulic motor seals See your dealer for repairs.

worn or damaged

a) Low quantity of Fill reservoir to proper level.

hydraulic oil Increase reservoir storage capacity.

b) Improper oil Replace with proper oil.

c) Dirty oil or oil filter Change oil and oil filter according

to vehicle manufacturer’s

recommendation.

d) Fittings loose or damaged Tighten or replace fittings.

e) Hoses loose or damaged Tighten or replace hoses.

f) Improper hose size Check hose diameter and length

requirements.

a) Hydraulic relief pressure Adjust vehicle hydraulic relief

setting too high pressure setting to within drive

unit specifications.

b) Hoses worn or damaged Replace hoses.

c) Hose rating too low for Replace with hoses with

hydraulic system pressure working pressure rated higher

than vehicle hydraulic pressure.

d) Hoses pinched Reroute hoses.

For additional assistance, please call your dealer or contact Danuser direct:

Tel: (573) 642-2246

Fax: (573) 642-2240

E-mail: sales@danuser.com

PROBLEM POSSIBLE CAUSE SOLUTION

Auger Will

Not Drill

Slow Speed

Lacks Drilling

Power

Oil Leaks

Oil Over

Heating

Hydraulic

Hose Failure

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Danuser EP20 Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Danuser EP20